Edelbrock Automobile Parts 207 2 User Manual

Catalog #207-2  
Russell ProClassic Hose & Full Flow Hose Ends  
ASSEMBLY PROCEDURE  
Please study this procedure carefully before assembling your new Russell ProClassic Hose and Full Flow Hose Ends. If you have any  
questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through  
Friday or e-mail us at [email protected].  
ASSEMBLY PROCEDURE  
1. Cut hose to length, as straight and square as possible, with razorblade-type hose cutter or shears (See Fig. 1).  
2. Unscrew socket from hose end. Push hose into socket, turning counter-clockwise, until hose is seated against step in socket  
(See Fig. 2). Make sure rubber part of hose does not protrude into socket threads.  
3. Apply Russell assembly lube to threads on nipple assembly and in socket (See Fig. 3). Insert nipple into socket/hose and  
start threads by hand (clockwise). Hold socket/hose in vise. Turn nipple with wrench until there is less than 1/16” between  
nipple hex and socket (See Fig. 4).  
4. Repeat Steps 1-3 for other end of hose.  
5. Flush hose assembly with solvent or soapy water and blow clean with compressed air or let air dry.  
Fig. 2  
Fig. 1  
Fig. 3  
Fig. 4  
Edelbrock Corporation, 2700 California Street, Torrance, CA 90503  
Toll-Free Tech Line: 1-800-416-8628  
Tech E-Mail: [email protected]  
Catalog #207-2  
Brochure #63-207-2  
©2007 Edelbrock Corporation  
Rev. 4/07 - BC/FA/mc  
 

Earthquake Sound Speaker HoLeeS 12 User Manual
EAW Speaker PH10 User Manual
Excell Precision Scale WEIGHING SCALES User Manual
Extron electronic Stereo Amplifier MDA 2V EQ User Manual
Fisher Price Baby Gym BMH49 User Manual
Fisher Price High Chair P5755 User Manual
Fisher Price Motorized Toy Car M1030 User Manual
Frigidaire Refrigerator GLRT188WDB6 User Manual
FujiFilm Digital Camera 3193 User Manual
GE Washer WWA8819M User Manual